The SD10N is the flagship of the HBXG range — an ultra-class 670 HP dozer built for the largest open-cast mining and bulk earthmoving operations. 66,700 kg operating weight, 18.5 m³ blade and Cummins QSK19-C755 power deliver what the top of the market demands.
| Mfano wa Injini | Cummins QSK19-C755 |
| Kiwango cha Uzalishaji wa Hewa Chafu | Tier III |
| Nguvu Iliyokadiriwa | 493 kW / 670 HP |
| Kasi Iliyokadiriwa | 1,800 RPM |
| Ujazo wa Injini | 19 L |
| Uzito wa Uendeshaji | 66,700 kg |
| Aina ya Bamba | Semi-U Tilt Blade |
| Upana wa Bamba | 4,860 mm |
| Uwezo wa Bamba | 18.5 m³ |
| Kina cha Juu cha Kuchimba | 674 mm |
| Presha kwenye Ardhi | 132 KPa |
| Upana wa Njia ya Bendi | 2,250 mm |
| Upana wa Viatu vya Bendi | 610 mm |
| Hatua ya Bendi | 260 mm |
| Umbali wa Chini kutoka Ardhini | 716 mm |
| Uwezo wa Kupanda Mlima | 30° fwd / 25° rev |
| Vipimo vya Jumla | 9,450 x 4,860 x 4,360 mm |
| Kasi ya Juu ya Mbele | 11.4 km/h (3rd gear) |
| Kasi ya Juu ya Kurudi Nyuma | 15.0 km/h (3rd gear) |
| Mfumo wa Uendeshaji | Planetary power shift — 3 fwd / 3 rev |
| Mfumo wa Chini | Elevated sprocket, elastic suspension |
Vipimo ni vya kiashiria na vinategemea usanidi. Wasiliana nasi kwa maelezo kamili ya usanifu.
Makadirio ya kiashiria kupitia Aulio Capital. Yanategemea idhini ya mkopo na kiwango kikuu cha kukopesha. Yamejumuisha VAT.
Ona Chaguzi Zote za Ufadhili →Broshara kamili ya bidhaa ikijumuisha maelezo kamili ya vipimo, michoro ya vipimo na data za kiteknolojia. Inapatikana kama PDF ya kushiriki na timu yako ya mradi au idara ya ununuzi.
Wasiliana na timu yetu kwa bei, upatikanaji na nukuu rasmi. Tunajibu ndani ya siku moja ya kazi.
World Focus 1724CC • HBXG South Africa • South African Jurisdiction
Kwa kufikia au kutumia tovuti iliyopo katikawww.hbxg.co.za (the "Platform"), operated by World Focus 1724CC (Registration No. 1724CC), you agree to be bound by the terms and conditions set out in this document. If you do not agree with these terms, please discontinue use of the Platform immediately.
Your continued use of the Platform constitutes your ongoing acceptance of these terms as they may be updated from time to time. We reserve the right to amend these terms at any time without prior notice. Updated terms take effect upon publication on the Platform.
You accept full responsibility for how you use the Platform, including any information obtained from it. You agree to use the Platform lawfully and in accordance with all applicable South African legislation, including but not limited to the Electronic Communications and Transactions Act 25 of 2002 (ECTA) and the Consumer Protection Act 68 of 2008 (CPA).
While we endeavour to ensure that information provided on this Platform is accurate and current, we make no warranty or representation — express or implied — as to the accuracy, completeness, suitability, or fitness for purpose of any content. The Platform is provided on an "as is" and "as available" basis.
Users may not use this Platform to engage in any unlawful activity, distribute malicious software, infringe on intellectual property rights, or attempt to gain unauthorised access to any part of the Platform or its associated systems.
All content on this Platform, including but not limited to text, images, product brochures, technical specifications, logos, and AI-generated outputs, remains the intellectual property of World Focus 1724CC or its licensors. Reproduction, redistribution, or commercial use without written permission is prohibited.
We reserve the right to modify, suspend, or discontinue any part of the Platform or its services at any time, without liability to users.
Important: This Platform incorporates Artificial Intelligence (AI) technology to assist users with product information, technical guidance, and general enquiries. AI outputs are generated automatically and may not always reflect current, accurate, or complete information.
The AI assistant embedded in this Platform is designed to provide general guidance and information about HBXG equipment and related applications. However, AI-generated responses are inherently subject to limitations, including:
Maudhui yote yaliyozalishwa na AI kwenye Jukwaa hili yametolewa kwa ajili yadhumuni la taarifa na mwongozo wa jumla pekee. It is not intended to be, and should not be construed as, professional advice of any kind.
You must not rely solely on AI outputs for any of the following decisions:
Financial investment or procurement decisions • Legal or contractual obligations •
Engineering or safety-critical specifications • Medical or occupational health matters •
Regulatory or compliance determinations
Before acting on any AI-generated information — particularly in relation to technical specifications, pricing, financing, regulatory compliance, or operational suitability — users are strongly advised to verify the information with a qualified professional or by contacting our team directly at info@hbxg.co.za or +27 61 074 1964.
AI responses generated by this Platform are suggestions based on the information provided by the user and the AI system's training data. They do not constitute professional, legal, financial, or technical advice. World Focus 1724CC expressly disclaims any liability arising from user reliance on AI-generated content.
AI responses on this Platform are generated using third-party AI infrastructure. While we take reasonable steps to configure AI behaviour appropriately, we cannot guarantee the outputs of underlying AI systems. Users should be aware that AI capabilities and limitations continue to evolve.
To the fullest extent permitted by applicable South African law, World Focus 1724CC, its directors, employees, agents, and representatives shall not be liable for any loss or damage arising from your use of, or inability to use, this Platform or its content.
Without limiting the above, we expressly exclude liability for:
Use of this Platform is entirely at your own risk. This includes, but is not limited to, any reliance on pricing indications, technical specifications, application recommendations, or any content generated by the AI assistant.
We make no warranty, express or implied, regarding the Platform's fitness for any particular purpose, merchantability, or non-infringement. We do not warrant that the Platform will meet your requirements or that it will be available continuously without interruption or error.
Nothing in these terms is intended to limit any rights you may have under the Consumer Protection Act 68 of 2008 or any other applicable South African legislation that cannot lawfully be excluded.
If you believe information provided on this Platform is materially incorrect or has caused you concern, please contact us directly so we may address it promptly: info@hbxg.co.za
World Focus 1724CC is committed to protecting your personal information in accordance with the Sheria ya Ulinzi wa Taarifa za Binafsi namba 4 ya 2013 (POPIA) and its associated regulations. This section explains what information we collect, how we use it, and your rights as a data subject.
We collect only the minimum personal information necessary to deliver our services. This may include:
Personal information collected through this Platform is used exclusively for:
We do not sell, rent, or trade your personal information to any third party for commercial or marketing purposes.
Your information may be shared with trusted third-party service providers where strictly necessary to operate the Platform (for example, AI processing providers, email delivery services, or analytics tools). All such parties are required to handle your data in accordance with applicable privacy laws.
We take reasonable and appropriate technical and organisational measures to protect your personal information against unauthorised access, loss, destruction, or alteration. However, no method of data transmission or storage can be guaranteed as completely secure.
As a data subject under POPIA, you have the following rights:
For any privacy-related enquiries, requests, or complaints, please contact our Information Officer at:
Email: info@hbxg.co.za • Phone: +27 61 074 1964
We retain personal information only for as long as necessary to fulfil the purpose for which it was collected, or as required by law. Enquiry and contact records are typically retained for up to 3 years in line with standard commercial practice.
By using this Platform, and in particular by interacting with the AI assistant, you consent to the following data processing activities as described in this notice.
When you submit a message or query to the AI assistant embedded on this Platform, you consent to:
AI responses are generated with the assistance of third-party AI platform providers. Your query inputs may be processed by these providers' systems in accordance with their own terms of service and privacy policies. We take reasonable steps to ensure that such providers maintain appropriate data handling standards.
Data submitted through the AI assistant is used exclusively to:
It is not used for unrelated marketing, profiling, or sale to third parties.
You may withdraw consent to data processing at any time by ceasing use of the Platform and contacting us at info@hbxg.co.za to request deletion of any records associated with your enquiries.
Continued use of the AI assistant constitutes your informed consent to this processing. If you are not comfortable with your inputs being processed as described, please contact our team directly by phone or email instead.
The content published on this Platform, including all AI-generated responses, product information, application guidance, financial commentary, and technical descriptions, is provided for dhumuni la taarifa za jumla pekee.
Nothing on this Platform constitutes, or should be relied upon as, professional advice of any kind — including but not limited to legal advice, financial advice, engineering advice, procurement advice, regulatory guidance, or medical advice.
Where a decision carries material financial, legal, safety, or operational significance, we strongly recommend that you consult with a suitably qualified and registered professional before proceeding. Our team is available to connect you with appropriate support where we are able to do so.
While our consultants and AI assistant will endeavour to recommend appropriate equipment for your stated application, final determination of equipment suitability for any specific site, geological condition, regulatory environment, or operational requirement remains the responsibility of the purchaser and their nominated technical advisors.
These Terms of Use, Disclaimer, and Privacy Notice are governed by and construed in accordance with the laws of the Jamhuri ya Afrika Kusini, without regard to its conflict of law provisions.
Any dispute arising from or in connection with your use of this Platform, or from any content or AI-generated output obtained through it, shall be subject to the exclusive jurisdiction of the courts of the Republic of South Africa.
We encourage users to contact us directly in the first instance to resolve any concern or dispute informally and in good faith. Where informal resolution is not achievable, disputes will be referred to the applicable South African court of competent jurisdiction.
This Platform operates in compliance with, and these terms are to be read alongside, the following South African legislation (as amended from time to time):
If any provision of these terms is found to be unlawful, void, or unenforceable for any reason, that provision shall be deemed severable and shall not affect the validity or enforceability of the remaining provisions.
These terms, together with any additional terms specific to particular services offered on this Platform, constitute the entire agreement between you and World Focus 1724CC in relation to your use of this Platform.
World Focus 1724CC • Authorised HBXG Agent • South Africa
info@hbxg.co.za • +27 61 074 1964 • www.hbxg.co.za
By using this Platform you agree to these terms • World Focus 1724CC • South African law applies
H
